Matsui MML50B18E Instruction Manual
![Matsui MML50B18E manual cover](/images/HnfIejfdYkdpkQIdERgMxoTH/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the thermostat dial inside the refrigerator compartment and turn it clockwise to lower the temperature or counterclockwise to increase it.
Check if the refrigerator is plugged in and that the thermostat is set to the correct temperature. Ensure that the vents are not blocked and clean the condenser coils if necessary.
Defrost the refrigerator once the frost buildup reaches about 5mm. This usually occurs every 6 months, but it can vary depending on usage and humidity levels.
Use a mixture of mild detergent and warm water. Wipe down all surfaces with a soft cloth, then dry with a clean towel. Avoid using abrasive cleaners or scouring pads.
This could be due to a blocked defrost drain. Clean the drain hole inside the refrigerator using a pipe cleaner or a similar tool to clear any obstruction.
First, unplug the refrigerator. Remove the cover of the light bulb compartment, unscrew the old bulb, and replace it with a new one of the same wattage.
Ensure the refrigerator is level and not touching any walls or cabinets. Check if any items inside are vibrating against each other. If the noise persists, contact a technician.
Yes, the door swing can be reversed. Refer to the user manual for step-by-step instructions or contact a professional to perform the task.
Keep the refrigerator away from heat sources, ensure the door seals are tight, and maintain adequate space around the unit for proper air circulation.
Regularly clean the condenser coils, check and clean the door seals, defrost as needed, and ensure the unit is level and properly ventilated.