Matsui M714WM18G Instruction Manual

To start a wash cycle, first load your laundry into the drum and close the door. Turn the dial to select the desired wash program and press the 'Start/Pause' button to begin the cycle.
Ensure the machine is plugged in and the power switch is turned on. Check if the door is properly closed and the 'Start/Pause' button has been pressed. If the problem persists, consult the troubleshooting section in the user manual.
Remove the detergent drawer by pulling it out until it stops, then press down on the lever to fully remove it. Rinse under warm water to remove any detergent residue and dry before placing it back in the machine.
Run an empty cycle with a drum cleaner or a cup of white vinegar once a month to keep the drum clean and free from odors.
Excessive vibration can be caused by an unbalanced load. Try redistributing the clothes inside the drum. Also, check if the machine is level on the ground.
Check if the drainage hose is kinked or clogged. Ensure the drainage filter is clean and free of debris. Refer to the user manual for instructions on cleaning the filter.
Run a hot wash cycle with a washing machine cleaner or a mixture of baking soda and vinegar to eliminate odors. Ensure the door is left open after washes to allow the drum to dry.
To reset the machine, unplug it from the power outlet, wait for a few minutes, and then plug it back in. This can help resolve minor electronic glitches.
The Matsui M714WM18G has a load capacity of 7 kg. Ensure not to overload the machine to maintain optimal performance and prevent damage.
Yes, the Matsui M714WM18G has a delicate wash program that gently cleans delicate fabrics. Always check garment labels for specific washing instructions.