Matsui M612EWM20G Instruction Manual
![Matsui M612EWM20G manual cover](/images/kjhESXoFpnLoiZlJaVzHhrWT/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry into the drum, add detergent, close the door, select the desired wash program using the control dial, and press the start button.
Ensure the machine is plugged in, the door is properly closed, the water supply is turned on, and the start button has been pressed. If the problem persists, check the circuit breaker or consult the manual for error codes.
Locate the filter at the bottom front of the machine, open the access panel, unscrew the filter cap, and remove any debris. Rinse the filter under running water and reinstall it securely.
Check if the drain hose is kinked or blocked. Ensure the filter is clean and the drainage pump is functioning. If the problem continues, consult the user manual or contact a service technician.
Regularly clean the drum, door seal, and detergent drawer. Check and clean the filter monthly, and run an empty hot wash cycle with detergent to maintain the drum's cleanliness.
Select your wash program, then press the delay start button to set the desired delay time. Press the start button to activate the delay timer. The machine will start the wash cycle after the set delay.
Ensure the machine is level on the floor, adjust the feet if necessary. Avoid overloading the drum and evenly distribute the laundry. Check for any transit bolts that may not have been removed.
Refer to the user manual for a list of error codes and their meanings. Follow the troubleshooting steps provided, such as checking connections or resetting the machine.
Wait a few minutes for the door lock to release after the cycle ends. If it remains locked, ensure the machine is not set to a child lock mode or try resetting the machine.
Yes, use the dedicated delicate or hand wash cycle. Place delicate items in a mesh laundry bag for added protection and use a gentle detergent.