Mastercook SKFD-138 User Manual
![Mastercook SKFD-138 Dryer manual cover](/images/HkHQADdLbTPTBEEyUkbQgkQB/thumbs/thumb175x175.webp)
To start a drying cycle, load your clothes into the drum, close the door securely, select the desired drying mode using the control panel, and press the 'Start' button.
Check if the dryer is properly plugged in and ensure the circuit breaker is not tripped. Clean the lint filter and ensure the ventilation system is not blocked. If the problem persists, consult the user manual or contact customer support.
Locate the lint filter inside the door opening. Pull it out, remove the accumulated lint by hand or with a soft brush, and reinsert it securely before using the dryer again.
Regularly clean the lint filter and check the venting system for blockages. Inspect the power cord and connections periodically, and schedule professional servicing annually to ensure optimal performance.
Ensure the dryer is level and placed on a stable surface. Check for any loose items in the drum or foreign objects that may be causing noise. Tighten any loose screws or bolts on the exterior.
Ensure the door is closed properly and the 'Start' button was pressed. Check for power interruptions or tripped circuit breakers. If the issue continues, refer to the troubleshooting section in the manual or contact support.
Yes, use the 'Delicate' setting to ensure low heat drying suitable for sensitive fabrics. Always check garment care labels before drying.
Remove clothes promptly after the cycle ends. Use the 'Wrinkle Guard' feature if available, and avoid overloading the dryer to allow proper tumbling.
Stop using the dryer immediately and unplug it. Check for lint buildup in the filter and vent. If the smell persists, contact a qualified technician to inspect the unit.
Clean the lint filter after each use, avoid overloading, and use the appropriate drying settings for different fabric types. Regular maintenance checks also help in maintaining efficiency.