Malmo B&M Unit 348385 Assembly Instruction
![Malmo B&M TV Unit 348385 manual cover](/images/99638fe7072f25408d90bde6/thumbs/thumb175x175.webp)
To assemble the Malmo B&M TV Unit 348385, start by laying out all parts and hardware. Follow the included manual step-by-step, beginning with the base and working upwards. Ensure all screws are tightly fastened but avoid over-tightening to prevent damage.
You will need a Phillips screwdriver, a flat-head screwdriver, and an Allen wrench, which is typically provided with the unit. A rubber mallet may also be useful for gentle adjustments.
To ensure stability on a carpeted floor, adjust the feet levelers located at the bottom of each leg. Make sure they are evenly adjusted to prevent wobbling.
The maximum weight capacity for the Malmo B&M TV Unit 348385 is approximately 100 kg (220 lbs). Distribute weight evenly across the unit for optimal safety.
Clean the unit with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials. For maintenance, periodically check and tighten screws to ensure structural integrity.
If a part is missing, contact the retailer or manufacturer directly with your purchase details. They will assist you in obtaining the missing parts.
While painting or customizing is possible, it may void the warranty. If you choose to customize, ensure surfaces are properly prepared and use suitable paints or finishes.
If you experience alignment issues, double-check that each part is correctly oriented as per the manual. Loosen and re-tighten the screws gradually to adjust the alignment.
Ensure you assemble the unit on a flat, stable surface. Keep children and pets away during assembly. Use tools safely and wear protective gear if necessary.
If sagging occurs, check and re-tighten all screws and bolts. Ensure the load is within the recommended weight capacity and distributed evenly. Consider additional support if necessary.