Malmo B&M Square Side 368385 Assembly Instruction

To assemble the Malmo B&M Square Side Table, start by laying out all the parts and hardware. Follow the step-by-step instructions in the manual provided, ensuring you use the correct screws and tools. Tighten all screws securely once assembled.
The assembly of the Malmo B&M Square Side Table typically requires a Phillips screwdriver and an Allen wrench, which is usually included in the package.
To clean the table, use a soft, damp cloth to wipe away dust and spills. Avoid using harsh chemicals or abrasive materials. For maintenance, regularly check and tighten any loose screws to ensure stability.
The Malmo B&M Square Side Table is designed for indoor use. Exposure to outdoor elements can cause wear and damage. If you need to use it outdoors, ensure it is sheltered from direct weather.
If the table wobbles, check that all screws are tightened properly. If the issue persists, place the table on a flat surface and adjust the levelers, if available, or use furniture pads to stabilize.
Yes, you can repaint or refinish the table. Lightly sand the surface and apply a primer before painting. Choose a high-quality paint suitable for the table material. Allow adequate drying time between coats.
The Malmo B&M Square Side Table is designed to support up to 50 pounds (22.7 kg). Avoid placing excessively heavy items on the table to prevent damage.
To remove minor scratches, use a furniture polish or scratch remover designed for the table's material. For deeper scratches, sanding and refinishing may be required.
To move the table without causing damage, lift it instead of dragging it across the floor. Enlist help if needed to ensure it is carried safely and securely.
Yes, replacement parts are generally available. Contact the manufacturer or retailer where you purchased the table to inquire about specific parts and availability.