Logik LWC25S10 Instruction Manual
![Logik LWC25S10 manual cover](/images/VKLhfLJXLPJocExrNIHMglBh/thumbs/thumb175x175.webp)
To set the temperature, press the temperature control buttons located on the control panel. Adjust the temperature using the up and down arrows until you reach the desired setting.
Ensure the wine cellar is plugged in and the power is on. Check if the door is completely closed and the seal is not damaged. Make sure the temperature setting is correct and the unit is not placed in direct sunlight or near heat sources.
The Logik LWC25S10 is designed with an auto-defrost function. Ensure the unit is set to the correct temperature and avoid frequent door openings to minimize frost buildup.
Regularly clean the interior with a damp cloth and mild detergent. Check the door seal for any damage and ensure it is clean. Dust the coils at the back of the unit to maintain efficient cooling.
Yes, the Logik LWC25S10 is suitable for storing both red and white wines. Adjust the temperature to accommodate the type of wine, typically around 12-18°C for red and 8-12°C for white wines.
Some noise is normal as the unit operates. However, if you hear unusual rattling or vibrating, check that the wine cellar is level and not touching any walls or furniture. Tighten any loose parts.
To change the light bulb, first unplug the unit. Locate the light cover inside the wine cellar, remove it, and replace the bulb with one of the same type and wattage. Reattach the cover and plug the unit back in.
Place the wine cellar on a flat, stable surface away from direct sunlight, heat sources, and high humidity areas. Ensure there is enough space around the unit for proper ventilation.
To improve energy efficiency, keep the door closed as much as possible, avoid overloading the shelves, and maintain a consistent temperature setting. Regularly clean the condenser coils.
If the door seal is damaged, it should be replaced to ensure proper sealing and cooling efficiency. Contact the manufacturer or a professional technician for a replacement seal.