Logik LWC15B13 Instruction Manual
![Logik LWC15B13 manual cover](/images/kTeGgZdMQJbdAeexhvgOLBec/thumbs/thumb175x175.webp)
To set the temperature on your Logik LWC15B13 wine cellar, press the up or down arrow buttons on the control panel to adjust the temperature to your desired setting.
If your wine cellar is not cooling properly, ensure that the door is fully closed and the seal is intact. Check if the unit is placed in a location with adequate ventilation and that the ambient temperature is within the recommended range.
To clean the interior, unplug the unit and remove all bottles. Use a soft cloth and a mild detergent solution to wipe down the inside surfaces. Rinse with a damp cloth and dry thoroughly before replacing the bottles.
Unusual noises may be caused by the wine cellar being placed on an uneven surface. Ensure that the unit is level and that it is not in contact with any objects that may vibrate.
Yes, you can store other beverages like beer or soft drinks, but ensure the temperature is suitable for the type of beverage you are storing.
The Logik LWC15B13 wine cellar is designed to be frost-free. However, if frost does build up, defrost it by turning off the unit and allowing the ice to melt naturally.
The ideal temperature range for storing wine is between 12°C and 18°C. Adjust the settings on your wine cellar to maintain this range for optimal wine preservation.
To replace the light bulb, first unplug the unit. Remove the light cover and unscrew the old bulb. Replace it with a new bulb of the same type and wattage, then reattach the cover.
If the door won't close properly, check for obstructions in the door seal or around the hinges. Make sure that the door seal is clean and free from damage.
Condensation on the outside can occur in areas with high humidity. Ensure proper ventilation around the unit and consider using a dehumidifier in the room if necessary.