Logik LUR55W20E Instruction Manual
![Logik LUR55W20E manual cover](/images/qblREEnYDnQiTQWlbWdLzldi/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the thermostat control inside the refrigerator. Turn the dial to the desired setting, with a higher number for colder temperatures. Allow 24 hours for the refrigerator to reach the new temperature.
Unusual noises can be caused by the refrigerator not being level or items inside vibrating. Ensure the refrigerator is on a flat surface and check that items inside are not touching the walls. If noise persists, consider contacting customer service.
To clean the interior, unplug the refrigerator and remove all food items. Use a mixture of mild detergent and warm water to wipe down all surfaces. Rinse with clean water and dry with a soft cloth before plugging the unit back in.
Manual defrosting is needed when the frost layer reaches about 3-5 mm thick. To defrost, remove all items, unplug the refrigerator, and leave the freezer door open. Use a towel to absorb melting water. Clean and dry before restarting.
Check if the door seal is intact and clean. Ensure there are no obstructions on the shelves or in the hinge area. Adjust the leveling of the refrigerator if necessary to ensure proper door alignment.
Ensure the refrigerator is placed away from heat sources like ovens and direct sunlight. Keep the condenser coils clean and ensure the door seals are tight. Set the thermostat to an optimal temperature, usually around 37°F (3°C) for the fridge section.
First, check if the bulb needs replacing. Unplug the refrigerator, remove the bulb cover, and replace the bulb with one of the same type and wattage. If the light still does not work, there may be an electrical issue requiring professional service.
Ensure the temperature control is set correctly. Check that the door seals are clean and intact. Avoid overloading the fridge and ensure there is enough space for air circulation. Clean the condenser coils and ensure proper ventilation around the unit.
To change the door hinge side, safely remove the door by unscrewing the hinge bolts. Reattach the hinge to the opposite side using pre-drilled holes and reattach the door. Ensure it is properly aligned before tightening all screws.
Store raw meats on the bottom shelf to prevent dripping onto other foods. Use airtight containers for leftovers and keep fruits and vegetables in designated crisper drawers. Avoid overcrowding to allow proper air circulation.