Logik LUL55W14E Instruction Manual

To adjust the temperature, locate the thermostat dial inside the fridge compartment. Turn the dial clockwise to lower the temperature and counterclockwise to raise it.
Check if the fridge is plugged in and the power is on. Ensure the thermostat is set correctly. Verify that the door seals are clean and sealing properly. If the issue persists, consider contacting a technician.
The Logik LUL55W14E Larder is a larder fridge and typically does not require defrosting. However, if ice builds up, switch off the appliance, remove food, and allow the ice to melt naturally.
Disconnect the appliance from the power supply. Use a soft cloth with mild detergent and warm water to clean the interior and exterior. Avoid using abrasive cleaners.
First, unplug the fridge. Locate the light cover inside the fridge and remove it by unscrewing or unclipping it. Replace the bulb with one of the same type and wattage, then reattach the cover.
Ensure the fridge is level and not touching any walls or cabinets. Check for any loose items inside. If noises persist, consult the manual or contact a technician.
It's recommended to clean the condenser coils every six months to maintain optimal efficiency. Always unplug the appliance before cleaning.
It's best to let hot food cool down to room temperature before placing it in the fridge to prevent increasing the internal temperature and causing the appliance to work harder.
Ensure the fridge door is closed properly, avoid overloading the fridge, and keep it away from heat sources. Regularly clean the condenser coils and set the thermostat to the recommended temperature.
Yes, it is normal for the sides of the fridge to feel warm as the heat from inside is dissipated. However, if it feels excessively hot, check for adequate ventilation and ensure the condenser coils are clean.