Logik LUL55S10 Instruction Manual
![Logik LUL55S10 manual cover](/images/aQdiplmKfMdTWfFDUbHkNMmp/thumbs/thumb175x175.webp)
To adjust the temperature, locate the thermostat dial inside the refrigerator. Turn the dial to the desired setting: higher numbers indicate cooler temperatures.
Check if the thermostat is set to the correct temperature, ensure the door seals are clean and free from obstruction, and verify that the refrigerator is not overfilled.
Defrost your refrigerator when the frost build-up reaches approximately 3-5 mm to maintain optimal performance.
Use a soft cloth and a mixture of mild detergent and warm water to clean the interior surfaces. Rinse with clean water and dry thoroughly.
Unplug the refrigerator, remove the bulb cover inside the fridge, and replace the bulb with one of the same voltage and size. Reattach the cover after replacement.
This could be due to a blocked defrost drain. Check and clean the drain hole located at the back of the fridge's interior.
Empty the refrigerator, secure the doors, and transport it upright to avoid damaging the compressor.
Ensure that the refrigerator is level, check the door seals for wear or obstructions, and adjust the door hinges if necessary.
Ensure that the refrigerator is on a stable surface, not touching any walls, and the internal components are not loose.
Check the power cord and outlet. If the issue persists, consult a professional technician. Avoid using extension cords.