Logik LTT68S20 Instruction Manual
![Logik LTT68S20 manual cover](/images/ryESlqDtSmbOPeYMvWPsQdio/thumbs/thumb175x175.webp)
To adjust the temperature, locate the temperature control knob inside the refrigerator. Turn the knob to the left to decrease the temperature and to the right to increase it. Allow 24 hours for the temperature to stabilize after adjustments.
Ensure that the refrigerator is plugged in and the power is on. Check the thermostat settings to ensure they are set correctly. Make sure the vents inside the fridge are not blocked and that the door seals are clean and intact.
The Logik LTT68S20 is a manual defrost refrigerator. It should be defrosted whenever the ice build-up reaches about 1/4 inch thick. Regular defrosting helps maintain efficiency.
Water pooling can result from a blocked defrost drain. Check and clear the drain hole by using warm water or a pipe cleaner to remove any obstruction.
Unplug the refrigerator and locate the condenser coils, usually at the back or bottom. Use a vacuum or a coil brush to gently remove dust and debris. Clean the coils every 6 months to ensure efficient operation.
Regularly clean the door seals with warm soapy water to remove dirt and debris. Inspect them for cracks or tears and replace them if they are damaged to maintain a proper seal.
Unplug the refrigerator and remove the light cover inside the fridge. Unscrew the old bulb and replace it with a new one of the same type and wattage. Reattach the cover and plug the refrigerator back in.
Noises can be caused by the refrigerator being unlevel or by items vibrating against each other. Ensure the fridge is on a level surface and that items inside are not touching the walls. Tighten any loose components that may be rattling.
Keep the fridge full but not overfilled to allow air circulation. Avoid placing the refrigerator near heat sources and ensure the door seals are tight. Regularly clean the condenser coils and set the temperature to the manufacturer's recommended setting.
Check for obstructions that may be preventing the door from closing. Inspect the door seals for damage and ensure the refrigerator is level. Adjust the door hinges if necessary.