Logik LTT68S18 Instruction Manual
![Logik LTT68S18 manual cover](/images/OsgImyIgzytoZgOXjnRfeGkF/thumbs/thumb175x175.webp)
To adjust the temperature, locate the thermostat dial inside your refrigerator. Turn the dial to the desired setting. A higher number typically indicates a colder temperature. Allow 24 hours for the changes to take effect.
First, check if the refrigerator is plugged in and the thermostat is set correctly. Ensure the door seals are clean and sealing properly. If the problem persists, clean the condenser coils or contact customer support.
To defrost, unplug the refrigerator and remove all contents. Leave the door open and place towels around the base to catch dripping water. Once the ice has melted, clean the interior and dry it thoroughly before plugging it back in.
Remove all food and detachable shelves. Use a mixture of mild detergent and warm water to wipe down the interior surfaces. Rinse with clean water and dry with a soft cloth. Avoid using abrasive cleaners or scouring pads.
Water pooling can be caused by a blocked defrost drain. Clear the drain using a pipe cleaner or similar tool. Ensure the drain is free of debris and ice.
Inspect the door seals regularly for signs of wear or damage. Replace them if they are cracked or not sealing properly, typically every few years to maintain efficiency.
Unusual noises can be caused by items inside vibrating against each other. Ensure the refrigerator is level. If noises persist, check the fan and compressor for any obstructions or contact a technician.
Keep the refrigerator away from heat sources and ensure good ventilation around it. Regularly clean the condenser coils and maintain a moderate temperature setting. Make sure the door seals are in good condition.
Store raw meat and fish on the lower shelves to prevent dripping onto other foods. Keep fruits and vegetables in the designated crispers. Use airtight containers to prolong freshness and prevent odors.
Unplug the refrigerator and locate the light cover inside. Remove the cover and unscrew the old bulb. Replace it with a new bulb of the same type and wattage. Reattach the cover and plug the refrigerator back in.