Logik LSSBSS20 Instruction Manual
![Logik LSSBSS20 manual cover](/images/SiWahjCsWMCSSWhNjHRBpbOh/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the control panel inside the refrigerator. Use the temperature control dial to set your desired temperature. Refer to the user manual for recommended temperature settings.
First, check if the refrigerator is plugged in and the power supply is working. Ensure the doors are fully closed and the seals are intact. Clean the condenser coils and check the temperature settings. If the problem persists, consult a professional technician.
The Logik LSSBSS20 refrigerator is usually frost-free, but if you notice ice buildup, manually defrost the freezer once it reaches about 1/4 inch thick.
To clean the interior, unplug the refrigerator and remove all food items. Use a mixture of mild detergent and warm water to wipe down the shelves, drawers, and walls. Rinse with clean water and dry thoroughly before restocking.
Unplug the refrigerator. Locate the light cover inside the fridge, remove it by twisting or unclipping, and replace the bulb with a new one of the same type and wattage. Replace the cover and plug the refrigerator back in.
Some noise is normal as the compressor and fans operate. However, if you hear loud or unusual sounds, ensure the refrigerator is level and on a stable surface. If the noise persists, contact a technician.
Check if the drain hole at the back of the refrigerator is clogged. Clean it with a small brush or pipe cleaner. Ensure the refrigerator is level so that condensation flows properly to the drain.
Regular maintenance includes cleaning the condenser coils every 6 months, checking door seals for damage, adjusting the temperature settings, and ensuring proper airflow around the appliance.
When transporting, keep the refrigerator upright to prevent oil from the compressor from leaking into the cooling lines. Secure the doors and wrap the appliance in protective material to avoid scratches and damage.
Inspect the door gasket for any dirt or damage. Clean it with warm soapy water and check for any gaps. If damaged, consider replacing the gasket. Ensure the refrigerator is level and the doors are aligned.