Logik LSSBSS18 Instruction Manual
![Logik LSSBSS18 manual cover](/images/QetxgToEeHimZIWlypUIfzXt/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the control panel inside the refrigerator. Use the up and down arrow buttons to set your desired temperature. The recommended setting is between 3°C and 5°C for the fridge compartment.
First, ensure that the refrigerator is plugged in and the power is on. Check the temperature settings and make sure the vents inside are not blocked by food items. If the issue persists, inspect the door seals for any damage or gaps.
The Logik LSSBSS18 features a frost-free freezer, so manual defrosting is not necessary. However, if you notice excessive frost build-up, ensure the door is sealing properly and not left open frequently.
To clean your refrigerator, unplug it first. Remove all food items and shelves. Use a mixture of warm water and mild detergent to wipe down the interior and exterior surfaces. Dry with a soft cloth before replacing the shelves and food.
Unusual noises can be due to several reasons like the refrigerator not being level, items inside vibrating, or the compressor running. Ensure the fridge is on a flat surface and not touching the wall. If the noise continues, consult the user manual or a technician.
To replace the light bulb, unplug the refrigerator and locate the light cover inside. Remove the cover by unscrewing it or popping it off, depending on the model. Replace the bulb with a new one of the same type and wattage. Reattach the cover securely.
Check the drain hole inside the fridge for clogs and clear it if necessary. Ensure the fridge is level and the door seals are intact. If the issue persists, check the water supply line if your model has a connected water dispenser.
To maximize energy efficiency, keep the fridge away from heat sources like ovens and direct sunlight. Ensure there is adequate ventilation around the appliance. Regularly check and replace door seals if necessary to maintain a tight closure.
Yes, it is normal for the sides of a refrigerator to feel warm. This is due to the condenser coils releasing heat as they work to cool the interior. Ensure the appliance has enough space around it for proper airflow.
To reset the alarm, ensure the doors are properly closed and the temperature settings are correct. Press the alarm reset button on the control panel. If the alarm continues, check for any obstructions or issues with the door seal.