Logik LSD185W19E Instruction Manual
![Logik LSD185W19E manual cover](/images/FqeQJRPygXYKhOAdRXCDEECn/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the temperature control dial inside the refrigerator. Turn the dial towards the higher numbers for a colder temperature and towards the lower numbers for a warmer temperature.
First, check if the refrigerator is plugged in and the power is on. Ensure the temperature setting is correct. Clean the condenser coils and verify that the door seals are intact. If issues persist, consider contacting customer support.
The Logik LSD185W19E is typically a frost-free model, so manual defrosting is not necessary. However, if you notice frost buildup, ensure the door seals are tight and not obstructed.
Check to ensure the refrigerator is level and stable on the floor. Additionally, make sure the refrigerator is not touching the wall or other objects. If noises persist, consult the user manual or contact a professional technician.
Remove all food items and shelves. Use a mild detergent and warm water to clean the interior surfaces. Rinse with clean water and dry with a soft cloth before replacing shelves and food items.
Keep the refrigerator away from heat sources and direct sunlight. Ensure the door seals are intact, and the door is closed tightly. Set the temperature to the recommended level for efficient operation.
Check if the defrost drain is clogged and clean it if necessary. Ensure that the refrigerator is level to prevent water from pooling. Examine the door gaskets for any damage or debris.
Store raw meats on the lower shelves to prevent dripping onto other foods. Use airtight containers for leftovers and keep produce in crisper drawers. Avoid overloading to ensure proper air circulation.
Unplug the refrigerator. Remove the light cover inside the unit, unscrew the old bulb, and replace it with a new one of the same type and wattage. Reattach the cover and plug the refrigerator back in.
Check if the refrigerator is level and adjust the feet if necessary. Inspect the door seals for food debris and clean them. Ensure that the door hinges are not loose and tighten them if needed.