Logik LSBSW20 Instruction Manual
![Logik LSBSW20 manual cover](/images/aLXHbPSMbEOJqECYpTSuevZP/thumbs/thumb175x175.webp)
To reset the temperature settings, press the temperature button on the control panel. Adjust the settings using the up and down arrows until you reach the desired temperature.
Unusual noises can be due to the refrigerator not being level. Adjust the leveling feet to ensure stability, and make sure it is not in contact with walls or cabinets.
Ensure the refrigerator door seals are clean and intact, avoid frequent door openings, and keep it away from heat sources and direct sunlight.
Use a solution of mild soap and water to clean the interior. Remove shelves and drawers for easier access, and ensure they are dry before replacing them.
Disconnect the refrigerator from power, locate the light cover inside the unit, remove it, and replace the bulb with one of the same type and wattage.
Check the temperature settings, ensure the vents are not blocked, and verify that the door seals are properly sealing. Also, make sure the condenser coils are clean.
The Logik LSBSW20 is usually frost-free, but if you notice frost buildup, it is advisable to defrost it manually once or twice a year.
Check if the water supply is connected and turned on. Inspect the water filter for blockages and replace it if necessary.
Secure all shelves and drawers, keep the unit upright during transportation, and ensure it is well-padded to prevent damage.
Regular tasks include cleaning the condenser coils, checking door seals, and replacing the water filter as recommended by the manufacturer.