Logik LRBDAB14 Instruction Manual
![Logik LRBDAB14 manual cover](/images/kJSkvJtvHFNQwhOjIYptppnR/thumbs/thumb175x175.webp)
To set the time, press the 'Menu' button, navigate to 'Time Settings' using the tuning dial, and then set the hour and minutes accordingly.
Ensure that the radio is connected to a power source. Check the power cable for any damage, and try using a different outlet. If the issue persists, it may require servicing.
For better reception, fully extend the antenna and position the radio near a window. Avoid placing it near electronic devices that may cause interference.
Check the brightness settings in the menu. If the display is still not working, perform a reset by unplugging the radio for a few minutes and then plugging it back in.
To perform a factory reset, navigate to 'System Settings' in the menu and select 'Factory Reset'. Confirm your choice to reset the radio to its original settings.
Yes, the Logik LRBDAB14 can operate on batteries. Insert the appropriate size batteries into the compartment at the back of the radio.
Tune to the desired station, then press and hold the preset button until you hear a beep. Select a preset number to save the station.
Check the volume and equalizer settings. Ensure that the radio is not placed in a confined space that might distort sound. If using batteries, make sure they are not low on power.
Check the manufacturer's website for any available firmware updates. Follow the instructions provided in the update guide to install the new firmware.
Ensure that you are holding the preset button long enough to save the station. If the problem continues, perform a factory reset and try setting the presets again.