Logik LIW814W15 Instruction Manual

To start a washing cycle, first load your laundry into the drum. Add the appropriate amount of detergent to the detergent drawer. Select the desired wash program using the program dial. Press the start/pause button to begin the cycle.
Ensure that the power cord is properly plugged into an outlet and the machine is turned on. Check that the door is securely closed and that you've selected a wash program. If the issue persists, inspect the circuit breaker or consult the user manual for further troubleshooting steps.
To clean the detergent drawer, remove it from the machine by pulling it out and pressing the release lever. Rinse the drawer under warm water to remove any detergent residue. Use a soft brush if necessary. Dry thoroughly before reinserting it into the machine.
If the machine is not draining, check for blockages in the drain hose or pump filter. Ensure the hose is not kinked and that the pump filter is clean. If necessary, consult the user manual for instructions on how to clean the pump filter.
Perform a maintenance wash by running an empty cycle with hot water and adding a washing machine cleaner or white vinegar. This helps to remove detergent residues and prevent mold build-up inside the drum.
Error code "E10" indicates a water supply issue. Check that the water tap is open and that the inlet hose is not kinked or blocked. Ensure the water pressure is adequate. If the problem persists, contact a professional technician.
Ensure the machine is level by adjusting the feet. Avoid overloading the drum and distribute laundry evenly. Use anti-vibration pads if necessary. Check that all transit bolts have been removed if the machine is newly installed.
If clothes are still wet, ensure the spin speed selected was appropriate for the load. Check for blockages in the drain system. If the problem continues, the pump or motor may require inspection by a professional.
To pause a running cycle, press the start/pause button. The machine will stop, allowing you to add or remove laundry as necessary. Press the button again to resume the cycle.
It is recommended to clean the filter every month to ensure the machine operates efficiently. Regular maintenance prevents blockages and extends the machine's lifespan.