Logik LHDAB14 Instruction Manual

To set the time on your Logik LHDAB14 Radio, press the 'Menu' button, navigate to 'Settings,' select 'Time/Date,' and use the tuning controls to set the correct time.
Ensure that the radio is connected to a power source. Check the power cable and try a different outlet. If the issue persists, consider replacing the fuse or contacting customer support.
Extend the telescopic antenna fully and adjust its position. Move the radio closer to a window or higher location to enhance signal reception.
To perform a factory reset, go to 'Menu,' select 'System,' and choose 'Factory Reset.' Confirm when prompted. Note that this will erase all preset stations and settings.
Check if the volume is turned up and that the radio is not muted. Ensure the headphones are not plugged in, and verify that the correct source is selected.
Yes, the Logik LHDAB14 Radio can be powered using batteries. Ensure you are using the correct type and insert them according to the polarity markings.
Tune to the desired station, press and hold a preset button until the display confirms the preset is saved. Repeat for other stations.
Press 'Alarm,' select the alarm number, and adjust the time, sound source, and volume using the tuning controls. Confirm by pressing 'Select.'
Press the 'Mode' button to toggle between DAB and FM modes. The current mode will be displayed on the screen.
Check the power connection and ensure the radio is turned on. If the display remains non-functional, it may require service or repair.