Logik LFTG60A12 Instruction Manual

To set the clock, press the 'Clock' button, then use the '+' and '-' buttons to adjust the time. Press 'Clock' again to confirm.
Ensure the range is properly plugged in and the circuit breaker is not tripped. Check the oven settings and make sure the timer is not set to 'auto'.
To clean the oven door glass, use a non-abrasive cleaner and a soft cloth. Avoid using harsh chemicals or scrubbing pads.
First, disconnect the range from the power supply. Unscrew the protective cover inside the oven and replace the bulb with a new one of the same type. Reattach the cover and reconnect the power.
If you smell gas, immediately ensure all controls are off. Ventilate the area and do not turn on electrical appliances. Contact a qualified technician to inspect the range.
Remove the burners and soak them in warm soapy water. Use a soft brush to clean away any debris, then rinse and dry thoroughly before replacing them on the stovetop.
Ensure you're using the correct temperature settings and cooking time. Use oven thermometers to verify accurate temperature and rotate the food halfway through the cooking process.
A clicking noise is usually normal when the igniters are lighting the burners. If it persists, ensure the burners are clean and dry. If the noise continues, consult a technician.
Remove all racks and accessories from the oven. Press the 'Self-Clean' button and select the desired cleaning time. The oven door will lock automatically during the cycle.
Check if the range is properly connected to the power supply. If the issue persists, try resetting the circuit breaker or consult the user manual for further troubleshooting steps.