Logik LFC50B20 Instruction Manual
![Logik LFC50B20 manual cover](/images/jDgYgLxrPtXtpSUqrqHihUpe/thumbs/thumb175x175.webp)
To set the temperature on your Logik LFC50B20 Refrigerator, locate the temperature control dial inside the fridge. Turn the dial to the desired setting. The higher the number, the colder the temperature.
If your refrigerator is not cooling properly, check if the vents are blocked by food items, ensure the door seals are clean and sealing properly, and verify that the temperature setting is correct. If the issue persists, consider contacting a technician.
It is recommended to defrost the freezer compartment of your Logik LFC50B20 Refrigerator every 6 months or when the ice build-up reaches about 0.25 inches (6 mm).
Water pooling at the bottom of the fridge might be due to a blocked defrost drain. Check and clear the drain located at the back of the fridge to ensure proper drainage.
To improve energy efficiency, ensure the refrigerator is placed away from heat sources, keep the door closed as much as possible, and regularly clean the condenser coils.
The Logik LFC50B20 Refrigerator has dimensions of approximately 143 cm (H) x 50 cm (W) x 56 cm (D).
To change the interior light bulb, unplug the refrigerator, remove the light cover by unscrewing it, replace the bulb with a new one of the same type and wattage, and then reattach the cover.
Unusual noises can be caused by the refrigerator being uneven on the floor, items inside vibrating, or the compressor running. Check the level of the appliance and rearrange items inside to minimize noise.
To clean the condenser coils, unplug the refrigerator, locate the coils at the back or bottom, and use a vacuum cleaner with a brush attachment to remove dust and debris.
If the door is not closing properly, check for obstructions around the door seal, ensure the fridge is level, and inspect the door gasket for damage. Replace the gasket if necessary.