Logik LDWTT15E Instruction Manual
![Logik LDWTT15E manual cover](/images/kOjYZuCAtZcyvjfYeYxXJoTD/thumbs/thumb175x175.webp)
To start a wash cycle, load your dishes, add detergent, close the door, select the desired program using the program selector, and press the start button.
Check if the drain hose is kinked or blocked. Ensure the filter is clean and the sink drain is not clogged. Refer to the user manual for detailed troubleshooting steps.
To clean the filter, remove the lower rack, twist the filter assembly counterclockwise, lift it out, and rinse it under running water. Reinstall the filter by reversing the removal process.
Spots can be caused by hard water. Use a rinse aid to help prevent spots. Ensure the water softener is set correctly if your model has one.
To reset the dishwasher, turn it off by pressing the power button, wait for a few seconds, and then turn it back on. This can help resolve minor issues.
Regularly clean the filter and spray arms, check for clogs, use dishwasher cleaner monthly, and inspect the door gasket for any damage.
Noise can be caused by improperly loaded dishes or obstructions in the spray arms. Ensure dishes are securely placed and spray arms are unobstructed.
Ensure you are using rinse aid, select a longer drying cycle if available, and open the door slightly after the cycle to allow steam to escape.
Check if the water supply valve is turned on, the inlet hose is not kinked, and the filter is not clogged. Inspect the water inlet valve for any faults.
No, regular dish soap can cause excessive suds and damage the dishwasher. Always use dishwasher-specific detergent.