Logik LDW60W18N Instruction Manual

To start a wash cycle, first load the dishwasher with dishes. Then, add the appropriate amount of detergent, close the door, and select the desired wash program using the program selection buttons. Finally, press the start button to initiate the cycle.
If your dishwasher is not draining, check to ensure that the drain hose is not kinked or blocked. Also, inspect the filter for clogs and clean it if necessary. Make sure the sink drain is clear and the garbage disposal is not full if connected.
To clean the filter, remove the lower dish rack and locate the filter at the bottom of the dishwasher. Turn it counterclockwise to remove it. Rinse it under running water to remove debris and reinstall it by turning it clockwise.
Ensure that the spray arms are not blocked and are spinning freely. Check that the dishes are loaded correctly and not blocking the spray arms. Also, verify that you are using the correct type and amount of detergent.
To reset the dishwasher, turn off the dishwasher using the power button. Wait for a few minutes, then turn it back on. You can also unplug the dishwasher from the power source for a few minutes before plugging it back in.
Unusual noises may be caused by items in the dishwasher coming into contact with the spray arms. Ensure that dishes are properly secured in the racks and not obstructing the spray arms. Also, check for any loose items or utensils.
It is recommended to clean the dishwasher's interior once a month. Wipe down the door seals, clean the filter, and run an empty cycle with a dishwasher cleaner to maintain optimal performance.
Ensure that there are no obstructions preventing the door from closing, such as large utensils or improperly loaded dishes. Check the door latch for damage and ensure that it is aligned correctly.
No, regular dish soap should not be used in the dishwasher as it can create excessive suds that may overflow. Only use detergents specifically designed for use in dishwashers.
To improve drying performance, use a rinse aid to help water sheet off dishes. Ensure that the "heated dry" option is selected if available, and do not overload the dishwasher to allow proper air circulation.