Logik L914WM17E Instruction Manual

To start a wash cycle, load your laundry into the drum, add detergent to the appropriate compartment, close the door securely, select the desired wash program using the control dial, and press the start button.
Check if the drain hose is kinked or blocked. Ensure the pump filter is clean by accessing it from the front of the machine. If necessary, clean the filter and try running the drain cycle again.
Ensure the washing machine is level by adjusting the feet. Make sure the laundry is evenly distributed in the drum, and avoid overloading the machine.
Remove the detergent drawer by pulling it out until it stops, then press down on the release lever to fully remove it. Wash the drawer under warm water to remove any residue and reinsert it into the machine.
Regularly clean the detergent drawer and pump filter, check and clean the door seal for debris or mold, and run a maintenance wash with a washing machine cleaner to keep the drum fresh.
Refer to the user manual for a list of error codes and their meanings. Common solutions include checking water supply, ensuring the door is closed properly, and resetting the machine by unplugging it for a few minutes.
Wait a few minutes for the door lock mechanism to release. If it still won't open, check if the machine has fully drained. If not, manually drain the water using the drain hose and try opening the door again.
Ensure the door is closed properly, the power supply is connected, and the water tap is turned on. Check if the child lock is activated and disable it if necessary to start the program.
Use cold water wash cycles when possible, wash full loads instead of partial ones, and select energy-efficient settings. Regular maintenance, such as cleaning the drum and filters, can also improve efficiency.
Inspect the door seal for damage or debris and ensure it's clean and intact. Check the hoses for any leaks or loose connections. Tighten or replace parts as necessary to stop the leak.