Logik L90CHDG21 Instruction Manual

Pages 29

Year 0

Language(s)

of 29

Logik L90CHDG21 Specification

The Logik L90CHDG21 Hood is a highly efficient kitchen appliance designed to enhance your cooking environment by providing superior ventilation and air purification. It features a sleek, modern design with a stainless steel finish, making it a stylish addition to any contemporary kitchen. The hood operates with a 90 cm width, suitable for covering large cooking areas to efficiently capture smoke, grease, and odors.

Equipped with a powerful motor, the L90CHDG21 offers a maximum extraction rate of 500 cubic meters per hour, ensuring rapid removal of airborne pollutants. It offers three speed settings, allowing users to adjust the ventilation intensity according to their cooking needs. The hood also includes an easy-to-use push-button control panel, providing intuitive operation.

For added convenience, the Logik L90CHDG21 features two bright LED lights that illuminate the cooking area, improving visibility while being energy-efficient. It includes a washable aluminum grease filter, which can be easily removed and cleaned, ensuring long-term performance and maintenance simplicity. The hood supports both ducted and recirculating installation options, offering flexibility in kitchen setups.

The Logik L90CHDG21 operates at a noise level of approximately 65 decibels at maximum speed, balancing performance with quiet operation. Its energy efficiency rating is classified as class D, indicating moderate energy consumption. This hood is designed to meet modern kitchen demands, providing effective ventilation while maintaining a contemporary aesthetic. Its combination of functionality, style, and ease of use makes it a practical choice for households seeking a reliable ventilation solution.

Logik L90CHDG21 F.A.Q.

How do I install the Logik L90CHDG21 Hood?

To install the Logik L90CHDG21 Hood, first ensure you have all needed tools and parts. Follow the installation guide provided with the hood, ensuring to securely mount it onto a suitable wall or cabinet and connect the ducting if necessary. Always follow safety guidelines and consider professional installation if unsure.

What should I do if the hood is not extracting properly?

If the hood is not extracting properly, check for blockages in the duct, ensure the filters are clean, and verify that the fan is operating correctly. Also, confirm that the ducting is properly connected and not leaking air.

How do I clean the filters on my Logik hood?

To clean the filters, remove them from the hood and soak them in warm, soapy water. Use a soft brush to remove any grease or debris, rinse thoroughly, and allow them to dry completely before reinstalling.

What type of light bulb does the Logik L90CHDG21 use and how do I replace it?

The Logik L90CHDG21 hood uses LED bulbs. To replace, ensure the hood is off and cool, remove the cover, replace the bulb with a compatible LED bulb, and reattach the cover securely.

Why is my hood making unusual noises?

Unusual noises may be due to loose components, debris in the fan, or worn-out parts. Inspect the unit for loose screws or obstructions and tighten or clean as necessary. If noises persist, contact a professional technician.

How often should the filters be replaced or cleaned?

The filters should be cleaned approximately every 3 to 4 weeks, depending on usage. Replace them if they show signs of damage or if cleaning no longer restores their effectiveness.

What is the best way to maintain the exterior finish of the hood?

To maintain the exterior finish, regularly wipe the surface with a soft, damp cloth, using a mild detergent if necessary. Avoid abrasive cleaners or pads that could scratch the surface.

How can I test if the fan is operating at full capacity?

To test the fan's capacity, turn the hood to its highest setting and listen for consistent airflow. You can also place a lightweight piece of paper near the hood's intake and see if it holds or moves the paper. If not, service may be needed.

What should I do if the control panel is not responding?

If the control panel is not responding, check the power supply and ensure the hood is properly plugged in. If the problem persists, reset the unit by turning it off at the circuit breaker for a few minutes before turning it back on.

Can the Logik L90CHDG21 be used in recirculation mode?

Yes, the Logik L90CHDG21 can be used in recirculation mode. Ensure the charcoal filters are installed to effectively remove odors and impurities from the air before recirculation.