Logik L90CHDG17 Instruction Manual

Pages 28

Year 0

Language(s)

of 28

Logik L90CHDG17 Specification

The Logik L90CHDG17 Hood is a sophisticated kitchen appliance designed to enhance ventilation and maintain air quality in modern culinary spaces. This chimney hood features a sleek, curved glass design that complements contemporary kitchen aesthetics while offering efficient performance. It is equipped with a powerful extraction system capable of both ducted and recirculation modes, providing flexibility based on kitchen setup and user preference. The hood operates at a maximum extraction rate of 600 cubic meters per hour, making it suitable for medium to large kitchens.

Its performance is supported by a three-speed fan, allowing users to adjust the extraction rate to match cooking demands. The Logik L90CHDG17 incorporates easy-to-use push-button controls, ensuring straightforward operation for adjusting fan speeds and lighting. Illumination is provided by two integrated LED lights, offering energy-efficient and bright lighting to enhance visibility while cooking.

The appliance includes a washable aluminum grease filter, designed to trap airborne grease and maintain the hood's efficiency over time. For recirculation mode, the hood can be fitted with optional carbon filters to neutralize odors. Measuring 90 cm in width, this hood is ideally suited for placement above standard-sized cooktops and ranges. The Logik L90CHDG17 is designed with user convenience in mind, featuring a straightforward installation process and compatibility with various kitchen configurations. Overall, it combines functionality with a modern design, making it a practical and stylish addition to any kitchen environment.

Logik L90CHDG17 F.A.Q.

How do I install the Logik L90CHDG17 Hood?

To install the Logik L90CHDG17 Hood, first ensure the power is off. Secure the hood to the wall using the provided brackets and screws, ensuring it is level. Connect the venting system and attach the chimney cover. Finally, connect the electrical wiring as per the manual instructions.

What should I do if the hood fan is not working?

Check the power supply to ensure the hood is plugged in. Verify the circuit breaker or fuse is not tripped. If the issue persists, inspect the fan switch and motor for faults or contact a professional technician for assistance.

How can I clean the filters of the hood?

Remove the filters by pressing the release buttons. Soak them in warm, soapy water and scrub gently with a brush. Rinse thoroughly and allow them to dry completely before reinstalling. You can also clean them in a dishwasher.

What type of bulbs does the hood use for lighting?

The Logik L90CHDG17 Hood uses LED bulbs. Refer to the user manual for the specific type and wattage, and ensure replacements are compatible with the hood's specifications.

How do I reduce noise from the hood?

Ensure the hood is securely mounted and all screws are tightened. Check for obstructions in the ventilation system. Clean the fan blades and filters to prevent vibration-related noise.

Can I use the hood with a recirculating system?

Yes, the Logik L90CHDG17 Hood can be used with a recirculating system. Install carbon filters to capture odors. Refer to the manual for instructions on converting the hood to recirculation mode.

What maintenance is required for the hood?

Regularly clean the filters and the hood's exterior surfaces. Check and replace the carbon filters if using recirculation mode. Inspect the fan and motor for dust buildup and clean as necessary.

How do I replace the LED light in the hood?

Turn off the power to the hood. Remove the light cover by unscrewing it or gently prying it off. Replace the bulb with a compatible LED bulb and reattach the cover. Restore power to test the new bulb.

Why is my hood not extracting air effectively?

Ensure that the ducting is properly installed without any blockages or leaks. Clean the filters and fan. Check that the fan speed is set appropriately for the cooking activity.

How do I troubleshoot an unresponsive control panel?

Check the power supply and ensure the hood is plugged in. Reset the circuit breaker if needed. If the control panel is still unresponsive, consult the manual for a reset procedure or contact customer support.