Logik L90CHDG11 Instruction Manual

Pages 24

Year 0

Language(s)

of 24

Logik L90CHDG11 Specification

The Logik L90CHDG11 Hood is a contemporary kitchen appliance designed to effectively remove smoke, odors, and grease from the air, ensuring a clean and fresh cooking environment. This chimney-style extractor hood boasts a sleek and modern design with a stainless steel finish, ideal for complementing any kitchen decor. It features a powerful extraction rate suitable for medium to large kitchens, with a maximum airflow rate of approximately 400 cubic meters per hour. The hood offers three-speed settings, allowing users to adjust the extraction power according to their cooking needs. Operated via easy-to-use push-button controls, it ensures a user-friendly experience.

Equipped with two efficient halogen lights, the Logik L90CHDG11 Hood provides ample illumination over the cooking area, enhancing visibility while preparing meals. The hood also includes washable aluminum grease filters, which are easy to remove and clean, ensuring hassle-free maintenance and optimal performance. It supports both ducted and recirculating modes, offering flexibility in installation. The ducted mode expels air outside, while the recirculating mode uses additional carbon filters to purify the air before releasing it back into the kitchen. The noise level of the hood is moderate, operating at approximately 65 decibels on its highest setting, thereby maintaining a relatively quiet kitchen environment. With its combination of performance, style, and practicality, the Logik L90CHDG11 Hood effectively enhances the kitchen's air quality and overall cooking experience.

Logik L90CHDG11 F.A.Q.

How do I properly install the Logik L90CHDG11 Hood?

To install the Logik L90CHDG11 Hood, ensure that it is mounted at least 65cm above your cooking surface. Use the included wall brackets and screws for secure mounting. Refer to the user manual for detailed step-by-step instructions.

What are the steps to clean the filters of the Logik L90CHDG11 Hood?

To clean the filters, first disconnect the hood from the power supply. Remove the grease filters and soak them in warm soapy water. Rinse thoroughly and let them dry before reinstalling. Regular cleaning is recommended to maintain efficiency.

How can I troubleshoot if the hood's light is not working?

Check if the bulb needs replacing. Ensure that the hood is connected to a power source. If the bulb and power supply are fine, consult a technician or refer to the manual for further guidance.

Why is the extraction performance of my Logik Hood weak?

Weak extraction performance can be due to clogged filters or obstructions in the ducting. Clean the filters and check the ductwork for blockages. Ensure that the hood is set to the correct extraction mode.

What should I do if the fan of the hood is noisy?

Ensure that the hood is correctly installed and that no parts are loose. Check for obstructions in the fan and clean any accumulated grease or debris. If the noise persists, seek professional service.

How do I change the light bulb in the Logik L90CHDG11 Hood?

To change the bulb, disconnect the hood from the power source. Remove the light cover and replace the bulb with a compatible type as specified in the manual. Reattach the cover and reconnect the power.

Can I use the Logik L90CHDG11 Hood in recirculation mode?

Yes, the hood can be used in recirculation mode. Ensure that the carbon filters are installed correctly to remove odors from the air being recirculated back into the kitchen.

How often should I replace the carbon filters in my Logik Hood?

Carbon filters should be replaced every 3 to 6 months depending on usage. Regular replacement ensures optimal performance in recirculation mode.

What power settings are available on the Logik L90CHDG11 Hood?

The Logik L90CHDG11 Hood typically offers multiple power settings, allowing you to adjust the extraction speed to low, medium, or high depending on your cooking needs.

How do I reset the filter indicator on my Logik Hood?

To reset the filter indicator, press and hold the reset button for a few seconds until the indicator light turns off. This process may vary slightly, so refer to the user manual for specific instructions.