Logik L8W5D21E Instruction Manual

To reset the Logik L8W5D21E, unplug the machine from the power source, wait for about 5 minutes, and then plug it back in. This should reset the electronic control board.
Ensure that the power cord is properly plugged in and that the door is securely closed. Check if the water supply is turned on and the start/pause button is pressed.
Remove the detergent drawer by pulling it out and pressing down on the release lever. Wash it under warm water to remove any detergent residue, then dry it before reinserting.
Stop the machine and redistribute the items evenly in the drum. Avoid washing bulky items with small ones to ensure balance.
Locate the filter at the bottom front of the machine. Open the cover, unscrew the filter, remove any debris or lint, rinse it under water, and then screw it back in place.
Check hoses for cracks or loose connections. Ensure that the detergent drawer is not clogged and the door seal is clean and intact.
Select your desired wash program and then press the delay button to set the desired time for the wash cycle to start. Confirm by pressing the start/pause button.
This could be due to an unbalanced load or foreign objects in the drum. Ensure that the load is balanced and check for any objects stuck in the drum.
Run a maintenance wash once a month using a washing machine cleaner or a mixture of vinegar and baking soda to keep the drum and pipes clean.
Ensure the cycle has finished. If the door is still locked, unplug the machine for a few minutes and then try opening it. If it remains stuck, consult the user manual for emergency release instructions.