Logik L714WM13E Instruction Manual

To start a wash cycle, load your laundry into the drum, add detergent to the dispenser, select your desired wash program using the control dial, and press the start button.
Check if the drain hose is kinked or blocked. Also, inspect the filter for any obstructions and clean it if necessary. Ensure that the drainage system is not clogged.
Remove the detergent drawer by gently pulling it out. Clean it with warm water and a soft brush to remove any detergent residues. Rinse thoroughly before reattaching it.
Regularly clean the detergent drawer, drum, and door seal. Check and clean the filter and drain pump. Run a maintenance wash monthly with a drum cleaner.
Ensure the machine is level by adjusting its feet. Make sure the load is balanced and not overloaded. Check if the transit bolts have been removed.
To reset the machine, unplug it from the power source for a few minutes, then plug it back in. This can help resolve minor electronic glitches.
Error code E20 indicates a drainage issue. Check the drain hose and filter for blockages, and ensure the pump is functioning properly.
Yes, select the 'Delicate' or 'Gentle' wash program, ensure to use a low spin speed, and place delicate items in a mesh laundry bag for protection.
Leave the door slightly open after each wash to allow air circulation. Regularly clean the door seal and run an empty hot wash with vinegar or a washing machine cleaner monthly.
Ensure that the machine is plugged in and the door is properly closed. Check the fuse or circuit breaker. If the problem persists, consult the user manual or contact customer support.