Logik L714WM12E Instruction Manual

To start a washing cycle, load your laundry into the drum, add detergent to the dispenser, select the desired wash program using the program selector dial, and press the start button.
If the machine is not draining, check if the drain hose is kinked or blocked. Also, ensure the filter is clean and that there are no obstructions preventing water from flowing out.
Remove the detergent drawer by pulling it out until it stops. Press down the release lever and pull the drawer out completely. Rinse under warm water to remove all detergent residue, and replace it once clean.
Excessive vibrations can be caused by an unbalanced load. Ensure the load is evenly distributed. Additionally, check if the machine is level and adjust the feet if necessary.
Regular maintenance includes cleaning the detergent drawer and filter, checking the hoses for signs of wear, and ensuring the machine is level. Run a maintenance wash at high temperature with no load periodically to keep the drum clean.
Foul odors can be eliminated by running a hot wash cycle with a washing machine cleaner or a mixture of vinegar and baking soda. Clean the detergent drawer and leave the door open after washes to allow drying.
Ensure the machine is plugged in and the power switch is turned on. Check the door is completely closed, and verify that the water supply is connected and turned on.
To reduce noise, ensure the machine is on a stable and level surface. Avoid overloading the machine, and use anti-vibration pads under the feet.
Refer to the user manual for the wash program guide. Generally, delicate fabrics require a gentle cycle, while cotton and heavily soiled items may need a more intensive wash.
Common error codes include E10 for water fill issues, E20 for drainage problems, and E30 for door lock issues. Consult the manual for a full list and troubleshooting steps.