Logik L712WM11 Instruction Manual
![Logik L712WM11 manual cover](/images/ISwOraKivUPxwFxJPpNhrUjK/thumbs/thumb175x175.webp)
To perform a quick wash, turn the program dial to the 'Quick Wash' setting. Adjust the temperature and spin speed if necessary, then press the start button.
First, check the drain hose for any blockages. Then, inspect the pump filter located at the bottom front of the machine for obstructions. Clean both if necessary.
Remove the detergent drawer by pulling it out and pressing the release catch. Clean the compartments with warm water and a soft brush, then replace it.
Ensure the cycle is complete and the 'door locked' indicator is off. If still locked, unplug the machine for a few minutes to reset it, then try opening the door again.
It is recommended to run a maintenance wash with no laundry, using a drum cleaning detergent, every 1-2 months to keep the drum clean.
The Logik L712WM11 has a maximum load capacity of 7 kg for a single wash cycle. Ensure not to overload the machine for optimal performance.
Ensure the machine is level on the ground. Check that all transit bolts have been removed and redistribute the load inside the drum if necessary.
Yes, use the 'Delicate' program setting. Select a low temperature and a gentle spin to prevent damage to delicate fabrics.
Monthly, you should clean the detergent drawer, check and clean the pump filter, and run a drum cleaning cycle to maintain optimal performance.
Use lower temperature settings, wash full loads, and select eco-friendly cycles to reduce energy consumption effectively.