Logik L55DAB15 Instruction Manual
![Logik L55DAB15 manual cover](/images/sEZLSALQbfURuIngiavUoOon/thumbs/thumb175x175.webp)
To set the alarm, press the 'Alarm' button on your Logik L55DAB15 Radio. Use the 'Select' knob to choose the alarm time and settings. Confirm your selections by pressing the 'Select' button again.
To perform a factory reset, press and hold the 'Menu' button until the menu appears. Navigate to 'System Settings' and select 'Factory Reset'. Confirm the reset when prompted.
If your radio is not turning on, check the power connection and ensure it is plugged in properly. Try using a different power outlet or test the outlet with another device. If the problem persists, contact customer support.
To improve reception, ensure the antenna is fully extended and positioned vertically. Try relocating the radio to a different spot with fewer obstructions and away from electronic devices that may cause interference.
The Logik L55DAB15 Radio does not support Bluetooth connectivity. You can connect your phone using an auxiliary cable if your phone has a headphone jack.
To save a radio station, tune to your desired station and press and hold one of the preset buttons (1-5) until you hear a beep, indicating the station has been saved.
Check if the radio is powered on and connected to a power source. If the display is still not working, it may require a reset or service from a professional technician.
Press the 'Mode' button on the radio to toggle between DAB and FM modes. The current mode will be displayed on the screen.
Clean the radio with a soft, dry cloth. Avoid using water or cleaning agents. Regularly check and dust the ventilation openings to prevent overheating.
Firmware updates for the Logik L55DAB15 are not typically user-initiated. Check the manufacturer's website for any available updates or contact customer support for assistance.