Logik L17KPS10 Instruction Manual

To descale your Logik L17KPS10 kettle, fill it with equal parts of water and white vinegar. Boil the mixture, then let it sit for about 30 minutes. Rinse thoroughly with fresh water to remove any lingering vinegar taste.
Ensure that the kettle is properly connected to a working power outlet. Check the power cord and plug for any visible damage. If the problem persists, the internal fuse may need replacement or the heating element could be faulty.
To clean the exterior, unplug the kettle and let it cool down. Use a damp cloth with mild detergent to wipe the surface. Avoid abrasive cleaners to prevent damage to the finish.
Loud noises can be caused by limescale buildup on the heating element. Descaling the kettle may reduce the noise. If the noise persists, it could indicate a fault in the heating element.
The Logik L17KPS10 kettle has a capacity of 1.7 liters.
Regularly descale your kettle using a mixture of water and white vinegar. Additionally, consider using filtered water to reduce mineral deposits.
It is not recommended to boil milk in the kettle as it can cause damage and is difficult to clean. The kettle is designed specifically for boiling water.
The Logik L17KPS10 kettle requires an AC power supply, typically 220-240V, 50/60Hz.
The Logik L17KPS10 kettle features a cord storage facility in the base to neatly wrap and store the power cord when not in use.
The kettle includes an automatic shut-off feature and boil-dry protection to enhance safety during operation.