Logik L17JKB13 Instruction Manual

To descale your Logik L17JKB13 Kettle, fill the kettle with a mixture of half water and half white vinegar. Let it soak for an hour, then boil the mixture, and rinse thoroughly with clean water. Repeat the process if necessary.
Ensure the kettle is properly connected to the power socket and that the socket is functional. Check the power switch and ensure it is in the "on" position. If the problem persists, the fuse might need replacing or the kettle may require professional servicing.
Check if the lid is closed properly and ensure the kettle is not filled beyond the maximum fill line. Inspect the base for cracks or damages. If leaking persists, contact customer support for repair options.
Regularly descale the kettle to remove mineral deposits. Fill the kettle only with the amount of water you need to minimize boiling time. Ensure the lid is tightly closed to retain heat.
It is not recommended to boil milk in your Logik L17JKB13 Kettle as it can cause residue buildup and may damage the appliance. Use the kettle for boiling water only.
Unusual noises might be due to scale buildup on the heating element. Descale the kettle using a vinegar solution. If the noise persists, inspect for any loose parts or contact customer support.
To clean the exterior, unplug the kettle and let it cool down. Wipe the surface with a damp cloth and mild detergent. Avoid using abrasive cleaners or scouring pads to prevent scratches.
Ensure the kettle is completely dry before storing. Wrap the cord around the base and store it in a cool, dry place away from direct sunlight to prevent damage.
If your kettle is not functioning properly, unplug it and allow it to cool down for a few minutes. Plug it back in and try again. If issues persist, consult the user manual or contact customer support.
To prevent limescale buildup, use filtered or distilled water when possible, and regularly descale the kettle. Empty the kettle after each use to reduce the chance of limescale formation.