Logik L15OFR20 Instruction Manual
![Logik L15OFR20 manual cover](/images/EWxgtdJcghOutCTYdWTWOruU/thumbs/thumb175x175.webp)
To turn on the Logik L15OFR20 Radiator, plug it into a power outlet and use the power switch located on the control panel. Adjust the temperature settings as needed.
Ensure that the power cord is properly plugged in and the power switch is turned on. Check the thermostat setting to make sure it is not set too low. If it still doesn't heat up, consult the user manual or contact customer support.
Regularly clean the radiator's surface with a soft, dry cloth to remove dust. Ensure that the vents are not blocked. Periodically check the power cord for any damage.
The Logik L15OFR20 Radiator is not designed for use in high-humidity environments like bathrooms. Use it in dry areas to prevent electrical hazards.
Use the thermostat dial on the control panel to set your desired temperature. Turn it clockwise to increase the temperature and counterclockwise to decrease it.
Some noise can occur due to the expansion and contraction of the heating elements. If the noise is excessive, ensure the radiator is on a stable, flat surface and check for any loose components.
While the radiator is equipped with safety features, it's generally recommended to use a timer or thermostat to shut it off overnight for safety and energy efficiency.
Immediately turn off the radiator and unplug it. Allow it to cool down and inspect for any visible damage. If the issue persists, contact customer support for assistance.
Use the radiator in well-insulated rooms, keep doors and windows closed, and set the thermostat to a moderate temperature. Consider using a timer to only run the radiator when needed.
The radiator includes overheat protection and a tip-over switch that automatically turns off the unit if it overheats or is accidentally knocked over.