Logik L12DCB15E Instruction Manual
![Logik L12DCB15E manual cover](/images/vOffETKIfcZRiFjyrCIgeVka/thumbs/thumb175x175.webp)
To descale your Logik L12DCB15E, fill the reservoir with a mixture of equal parts water and white vinegar. Run a brew cycle without coffee, then rinse by running two cycles with fresh water.
Ensure that the coffee maker is plugged in and the power switch is turned on. Check if there is water in the reservoir and if the filter basket is properly placed.
Clean the carafe with warm, soapy water and a soft sponge. Avoid abrasive cleaners to prevent scratching the glass. Rinse thoroughly before use.
Check if the water reservoir is overfilled or if the carafe is not positioned correctly under the filter basket. Inspect the seals and gaskets for any damage.
To program the auto-brew feature, press the program button, set the desired time with the hour and minute buttons, and then press the auto-brew button to activate it.
For the Logik L12DCB15E, a medium grind is recommended for optimal brewing performance and flavor extraction.
Replace the paper filter with each brew to ensure the best coffee quality. If using a permanent filter, clean it after each use.
Yes, you can brew tea by placing tea bags in the filter basket. Clean the coffee maker thoroughly after brewing non-coffee beverages to prevent flavor carryover.
Ensure you are using the correct coffee-to-water ratio and a medium grind. Check that the coffee maker is clean and free of any residue that might affect flavor.
To reset the coffee maker, unplug it from the power source, wait for a few minutes, and then plug it back in. This can resolve minor electronic glitches.