Logik L1014WM17 Instruction Manual
![Logik L1014WM17 manual cover](/images/XYTMKvyTYoFfeaOIBXwLExSb/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry into the drum, add detergent to the dispenser, select the desired program using the control dial, and press the start/pause button to begin the cycle.
If the machine doesn't drain, check the drain hose for blockages, ensure it's not kinked, and clean the pump filter located at the bottom front of the machine.
Remove the detergent drawer by pulling it out and pressing the release lever. Clean it under running water to remove any detergent residues, then dry and replace it.
Error code E10 typically indicates a water supply issue. Ensure that the water tap is turned on, the inlet hose is not kinked, and the filter in the inlet valve is not blocked.
To perform a maintenance wash, run an empty cycle at the hottest temperature with a cup of white vinegar or a washing machine cleaner to remove detergent build-up and odors.
Excessive vibration can be caused by uneven loading, unbalanced machine placement, or worn shock absorbers. Ensure the load is balanced and the machine is on a level surface.
To reset the machine, turn it off and unplug it from the power socket for a few minutes. Plug it back in and turn it on to clear any temporary faults.
If the door doesn't open, wait a few minutes for the lock to release. If it still won't open, ensure the cycle is complete and check for any water remaining in the drum.
It's recommended to clean the pump filter every month to prevent blockages and ensure the machine drains properly.
Yes, you can wash delicate fabrics using the machine's dedicated delicate or gentle cycle, which uses lower spin speeds and temperatures to protect the fabrics.