Klarstein SWEET SUNDAE 10034912 User Manual
![Klarstein SWEET SUNDAE 10034912 Ice Cream Maker manual cover](/images/OTlWeeyifwhuqmMDWCfLellN/thumbs/thumb175x175.webp)
First, ensure the bowl is pre-frozen for at least 12 hours. Assemble the machine, pour in your mixture, and switch it on. The machine will churn the mixture until it reaches the desired consistency.
Check if the device is properly plugged in and the power switch is on. Ensure the bowl is correctly seated and the lid is securely closed. If the problem persists, check the fuse or contact customer support.
Disassemble the machine and wash the bowl, mixing arm, and lid with warm soapy water. Wipe the exterior with a damp cloth. Ensure all parts are thoroughly dried before reassembly. Do not immerse the motor unit in water.
Ensure that the bowl was frozen for the recommended time and that the mixture is chilled before use. If the room temperature is too high, it might affect the freezing process. Consider reducing the room temperature or pre-chilling the mixture.
Yes, you can add mix-ins. Wait until the ice cream is almost done and then add the mix-ins through the opening on the lid. This prevents them from sinking to the bottom or interfering with the mixing process.
The Klarstein SWEET SUNDAE 10034912 can make up to 1.5 liters of ice cream per batch. Avoid overfilling to ensure proper churning and freezing.
Typically, it takes about 20 to 40 minutes to make ice cream, depending on the recipe and ambient temperature. For best results, ensure the mixture is pre-chilled.
Check if the machine is on a stable surface and ensure all parts are assembled correctly. Loud noises may also occur if the mixture is too thick or if there are large ice crystals; adjust the recipe if necessary.
Ensure your mixture is well-chilled before pouring it into the machine. Use ingredients that help reduce ice crystal formation, such as corn syrup or alcohol, and avoid over-churning.
Regularly clean all detachable parts after each use and ensure the motor unit is kept dry. Store the bowl in the freezer so it is always ready for use, and check the power cord for any signs of wear.