Klarstein SKYSCRAPER ICE 10028303 User Manual
![Klarstein SKYSCRAPER ICE 10028303 Air Cooler manual cover](/images/smwxjHnyVACdPlTIqRwlRGpi/thumbs/thumb175x175.webp)
To set up the Klarstein SKYSCRAPER ICE 10028303 Air Cooler, first ensure all parts are included. Fill the water tank with clean water and place the cooler on a flat, stable surface. Plug it into a power outlet and use the control panel to select your desired settings.
If the air cooler is not blowing cold air, check if the water tank is filled. Ensure the cooling mode is activated and the ice packs are in place for enhanced cooling performance.
It is recommended to clean the water tank and filters every two weeks to prevent mold and ensure optimal performance. Use mild detergent and warm water for cleaning.
No, it is not recommended to use essential oils in the air cooler as they can damage the unit and void the warranty.
The Klarstein SKYSCRAPER ICE 10028303 is suitable for rooms up to 50 square meters, depending on the environmental conditions.
If the air cooler is making unusual noises, check for any loose parts or debris obstructing the fan. Ensure the unit is on a stable surface and try repositioning it.
Yes, it is safe to run the air cooler overnight. Ensure the water tank is filled, and the unit is in a well-ventilated area to avoid overheating.
To improve cooling efficiency, use ice packs in the water tank and ensure the room is well-ventilated. Close blinds or curtains to reduce heat from direct sunlight.
During the off-season, thoroughly clean the air cooler, empty the water tank, and dry all components. Cover the unit to protect it from dust and store it in a dry place.
To reset the air cooler, unplug it from the power source, wait for a few minutes, and then plug it back in. Power it on and check the settings.