Klarstein LUMINANCE FROST 10033174 User Manual
![Klarstein LUMINANCE FROST 10033174 Refrigerator manual cover](/images/kmWPVyNHHEMnSUWNxHXqdDDO/thumbs/thumb175x175.webp)
To adjust the temperature, use the control panel located inside the refrigerator. Turn the temperature dial clockwise to lower the temperature and counterclockwise to increase it.
Ensure that the refrigerator is plugged in and the power is on. Check the temperature settings and make sure the door seals are clean and intact. If the problem persists, contact customer support.
It is recommended to defrost the refrigerator once every 6 months or when frost buildup exceeds 5mm to maintain efficiency.
Use a mixture of warm water and mild detergent to clean the interior. Remove all food items and shelves before cleaning. Rinse with clean water and dry thoroughly before replacing the shelves and food items.
Store raw meat on the bottom shelf to prevent cross-contamination. Place dairy products in the middle and use the crisper drawers for fruits and vegetables. Ensure items are not blocking air vents for optimal cooling.
Turn off the refrigerator and unplug it from the power source. Remove the cover of the light compartment, unscrew the old bulb, and replace it with a new one of the same type and wattage.
Water pooling can be due to a blocked defrost drain. Clear the drain by flushing it with warm water or using a pipe cleaner to remove any obstruction.
Ensure that the refrigerator is empty and securely close the doors. Keep it upright during moving to prevent compressor oil leakage and damage. Allow it to sit for a few hours after moving before plugging it back in.
The Klarstein LUMINANCE FROST 10033174 features an energy efficiency rating of A+, making it economical in energy consumption.
Unusual noises could be due to the refrigerator not being level or items vibrating against each other. Ensure the unit is on a flat surface and check for any loose items. If the noise persists, contact customer support.