Klarstein LAGOONA 10034631 User Manual
![Klarstein LAGOONA 10034631 Dishwasher manual cover](/images/FqPVmpVgfvpEdamBnxsBRkxf/thumbs/thumb175x175.webp)
To start a wash cycle, first load the dishwasher with dishes. Then, add detergent to the dispenser. Close the door securely and select the desired wash cycle using the control panel. Press the start button to begin the cycle.
If the dishwasher is not draining properly, check the filter and drainage hose for any blockages. Clean the filter if necessary. Ensure the drainage hose is not kinked or clogged. If the problem persists, consult the user manual or contact customer support.
It is recommended to clean the filter at least once a month to ensure optimal performance and prevent clogs.
Yes, you can use rinse aid in this dishwasher. It helps to improve drying performance and prevent water spots on your dishes. Fill the rinse aid dispenser as per the instructions in the user manual.
Unusual noises may be caused by items inside the dishwasher that are not properly secured. Check that all dishes and utensils are correctly placed and not touching each other. Also, ensure the spray arms are not obstructed.
To improve drying performance, ensure that you are using a rinse aid. Also, try opening the dishwasher door slightly after the cycle completes to allow steam to escape, which can help with drying.
If the dishwasher does not start, check that it is properly plugged in and that the circuit breaker has not tripped. Make sure the door is fully closed and latched. If the problem persists, refer to the troubleshooting section in the user manual.
To prevent spots and film, use a good quality detergent and ensure the rinse aid dispenser is filled. Also, make sure not to overload the dishwasher, allowing water to circulate freely around the dishes.
It is normal for a small amount of water to remain in the bottom of the dishwasher to keep the pump seals moist. However, if there is a significant amount, it may indicate a drainage issue. Check for blockages in the filter and drainage hose.
To reset the dishwasher, turn off the appliance and unplug it from the power source for a few minutes. Then, plug it back in and turn it on. This can help resolve minor technical glitches.