Klarstein HEATPAL MARBLE 10032022 User Manual
![Klarstein HEATPAL MARBLE 10032022 Heater manual cover](/images/PYsKUYwipWsWnPoJJJVdiXEC/thumbs/thumb175x175.webp)
To turn on the Klarstein HEATPAL MARBLE heater, plug it into a power outlet and use the power switch located on the side of the unit.
Ensure that the heater is plugged in and the power switch is turned on. Check the thermostat settings and increase the temperature if necessary. If the problem persists, consult the user manual or contact customer support.
Before cleaning, ensure the heater is unplugged and cooled down. Use a soft, dry cloth to wipe the exterior. Avoid using water or cleaning solutions directly on the heater.
Regularly check for dust accumulation and clean the exterior every few weeks. Inspect the power cord and plug for any signs of wear or damage before each use.
The Klarstein HEATPAL MARBLE heater includes safety features such as overheating protection. However, it is recommended to use the heater under supervision and not leave it unattended for extended periods.
Use the temperature control knob located on the heater to adjust the desired temperature level. Rotate the knob clockwise to increase and counterclockwise to decrease the temperature.
If the heater emits a strange smell, turn it off immediately and unplug it. Check for any visible signs of damage. If the problem persists, consult the user manual or contact customer support.
It is not recommended to use an extension cord with the heater, as it can lead to overheating and pose a safety risk. Always plug the heater directly into a wall outlet.
To maximize energy efficiency, use the heater in a well-insulated room and close doors and windows to prevent heat loss. Set the thermostat to the lowest comfortable setting.
The heater includes features like overheating protection and a tip-over switch to automatically turn off the unit if it is accidentally knocked over.