Klarstein AUDREY RETRO 10032238 User Manual V2
![Klarstein AUDREY RETRO 10032238 Refrigerator manual cover](/images/gCDtkIzdUyzVvVlvCjwZCXVS/thumbs/thumb175x175.webp)
To adjust the temperature, locate the temperature control dial inside the fridge. Turn the dial clockwise to lower the temperature and counterclockwise to increase it.
First, check if the refrigerator is plugged in properly and the power is on. Ensure the temperature setting is correct. Also, clean the condenser coils and check if the door seals are intact.
The Klarstein AUDREY RETRO Refrigerator is designed to be frost-free, so manual defrosting is not necessary. However, if frost buildup occurs, defrost as needed by following the manual instructions.
Turn off and unplug the refrigerator before cleaning. Use a mixture of mild detergent and warm water. Avoid abrasive cleaners. Clean the interior and shelves, then dry thoroughly before plugging back in.
Yes, the door hinge can be reversed. Refer to the user manual for step-by-step instructions or contact customer support for assistance.
Unusual noises may be caused by loose components or the refrigerator not being level. Ensure the refrigerator is on a stable surface and check for any loose parts. Consult the manual for troubleshooting tips.
Keep the refrigerator away from heat sources and ensure proper ventilation around it. Regularly clean the condenser coils and keep the door closed as much as possible to maintain efficiency.
Yes, it's normal for the sides and back of the refrigerator to feel warm as it dissipates heat. However, if it feels excessively hot, check the ventilation and clean the condenser coils.
Store raw meats on the lower shelves to prevent cross-contamination. Keep dairy and eggs in the main compartment, not the door, to maintain a consistent temperature. Use airtight containers to keep produce fresh.
Unplug the refrigerator before changing the bulb. Locate the light cover, remove it carefully, and replace the bulb with one that is compatible. Reattach the cover and plug the refrigerator back in.