Klarstein AUDREY 10033345 User Manual
![Klarstein AUDREY 10033345 Refrigerator manual cover](/images/DFGVxoDjscCzLxncrsKreakQ/thumbs/thumb175x175.webp)
To set the temperature, use the control panel located inside the refrigerator. Adjust the dial to your desired setting, typically between 3°C to 5°C for optimal food preservation. Refer to the manual for detailed instructions.
First, check if the refrigerator is properly plugged in and the circuit breaker is not tripped. Ensure the door seals are clean and not damaged. Adjust the temperature settings and allow 24 hours for changes to take effect. If the issue persists, contact customer support.
The refrigerator is equipped with an automatic defrost function. However, if you notice excessive frost build-up, manually defrost the unit by unplugging it and allowing the ice to melt. Clean and dry the interior before restarting.
To clean the interior, unplug the refrigerator and remove all food items. Use a mixture of warm water and mild detergent to wipe down all surfaces. Rinse with clean water and dry with a soft cloth before plugging the unit back in.
Ensure the refrigerator is level and on a stable surface. Check for any loose parts or objects on top of the appliance. Normal operational sounds include humming and clicking, but if unusual noises persist, contact customer service.
To replace the light bulb, unplug the refrigerator and locate the light cover inside. Remove the cover and replace the bulb with one of the same wattage and type. Secure the cover back in place and plug the unit in.
Check if the door seal is obstructed by any food items or debris. Clean the seal with a damp cloth. If the problem persists, inspect the seal for damage and consider replacing it. Ensure the refrigerator is level.
Regularly clean the condenser coils to improve efficiency. Check and clean the door seals to ensure a proper seal. Keep the refrigerator moderately full for optimal performance and defrost the freezer if ice builds up.
Ensure the refrigerator is positioned away from heat sources like ovens or direct sunlight. Keep the door closed as much as possible and ensure the seals are in good condition. Regularly clean the condenser coils to enhance efficiency.
The model and serial number are typically located on a label inside the refrigerator compartment or on the rear exterior. This information is useful for service requests and warranty registration.