Klarstein AROMATICA X 10032102 User Manual
![Klarstein AROMATICA X 10032102 Coffee Machine manual cover](/images/AaaXdQGjvwepnfIaimUSAgsb/thumbs/thumb175x175.webp)
To descale the coffee machine, fill the water tank with a descaling solution and water as per the manufacturer's instructions. Run the machine as if brewing coffee, without coffee grounds, until the water tank is empty. Rinse the machine by running two full cycles with clean water.
First, check if the machine is properly plugged into a functional power outlet. Ensure that the power switch is turned on. If the problem persists, check the fuse in the plug and consult the user manual for further troubleshooting steps.
To clean the coffee grinder, remove the bean container and use a brush to gently clean the grinder. Ensure the machine is unplugged during cleaning. Avoid using water or other liquids on the grinder.
A bitter taste might result from over-extraction. Try using a coarser grind, reducing the amount of coffee used, or shortening the brewing time. Additionally, ensure the machine is clean and free of old coffee oils.
The Klarstein AROMATICA X allows you to adjust the coffee strength by selecting the desired strength level on the control panel, which adjusts the amount of coffee ground per serving.
Check if the water tank is properly seated and if any seals or gaskets are damaged. Inspect the drip tray and ensure it is not overflowing. If the problem continues, contact customer support for assistance.
Refer to the user manual to set the timer function. Typically, this involves setting the clock on the machine and using the program button to schedule a brewing time.
Regular maintenance includes cleaning the drip tray, descaling the machine every few months, cleaning the grinder, and routinely wiping down the exterior with a damp cloth.
Ensure the bean container is correctly placed and not empty. Check for any obstructions or jammed coffee beans. If the grinder still doesn't work, unplug the machine and consult the user manual or contact support.
To reset the machine, turn it off and unplug it from the power source. Wait a few minutes before plugging it back in and turning it on. Refer to the user manual for specific reset instructions if necessary.