Kenmore 92552 790.9255 Installation Instructions

To perform a self-cleaning cycle, remove all oven racks and ensure the oven is empty. Close the oven door and lock it. Select 'Self Clean' on the control panel and choose the desired cleaning duration. Press 'Start' to begin the cycle. Once complete, allow the oven to cool before wiping away any ash residue.
First, check that the range is plugged in and the circuit breaker is not tripped. Ensure the oven settings are correct. If the problem persists, the heating element or temperature sensor might be faulty and require professional inspection or replacement.
Ensure that the oven racks are positioned correctly and that there is adequate space around the baking dishes for air circulation. Consider using an oven thermometer to verify the internal temperature matches the set temperature. If uneven baking continues, the oven calibration may need adjustment.
Check if the burner cap is properly aligned and clean. Ensure that the igniter is not wet or clogged. If the igniter clicks but does not ignite, it may need cleaning or replacement. If there is no click, the igniter switch might be defective.
Regularly clean the cooktop, oven interior, and control panel using appropriate cleaners. Inspect the burner caps and grates for residue buildup. Check the door seal for damage and ensure the vent openings are clear. Schedule periodic professional inspections to ensure optimal performance.
To reset the control board, unplug the range from the power outlet or turn off the circuit breaker for about 5 minutes. Restore power and see if the issue resolves. If problems persist, the control board may require professional servicing.
While you can use aluminum foil to catch drips or spills, avoid covering the entire oven rack or the oven floor as it can impede airflow and affect cooking performance. Use it sparingly and ensure it does not contact oven elements.
Ensure the oven is off and cool. Locate the light cover inside the oven and unscrew it. Remove the old bulb and replace it with a new one of the same type and wattage. Screw the light cover back in place securely.
Inspect the door hinges and gasket for damage or obstruction. Clean any debris or food particles that might be blocking closure. If the door is still misaligned, the hinges may need adjustment or replacement.
Press and hold the 'Bake' button on the control panel for several seconds until the display shows a temperature setting. Use the arrow keys to adjust the calibration up or down in 5-degree increments. Press 'Start' to save the changes.