Kenmore 70372 110.60372710 Installation Instructions

To clean the lint filter, first make sure the dryer is turned off. Open the dryer door and locate the lint filter at the bottom of the door opening. Pull the filter straight up, remove any lint by hand or with a vacuum, and slide it back into place. Clean the filter after every load to maintain optimal performance.
If the dryer is not heating, check if the circuit breaker has tripped or if the fuse is blown. Ensure that the dryer is plugged in properly. If these are fine, the problem might be with the heating element, thermal fuse, or thermostat, which may need inspection or replacement by a professional.
Loud noises can be caused by objects caught in the drum or worn-out components like drum rollers, idler pulleys, or blower wheels. Inspect the drum for any foreign objects and check if the components need replacement. If the noise persists, contact a service technician.
To improve drying time, ensure the lint filter is clean, and check that the exhaust vent is clear of obstructions. Avoid overloading the dryer, and use the appropriate drying cycle for the load type. Regular maintenance of vents and ducts can also enhance drying efficiency.
Regular maintenance includes cleaning the lint filter after each load, inspecting and cleaning the exhaust vent every six months, and checking for loose or worn-out parts. Periodic professional inspection can ensure all components are functioning correctly.
If the dryer stops mid-cycle, it could be due to a faulty door switch, a malfunctioning thermostat, or overheating. Check if the door is closing properly and inspect the thermal fuse. If issues persist, consult a professional technician for a detailed diagnosis.
To reset the dryer, unplug it from the power outlet and wait for about 5 minutes. Plug it back in and try running a new cycle. If the problem continues, refer to the user manual for specific troubleshooting steps or consult a technician.
Yes, you can stack the Kenmore 70372 dryer on a compatible washer, provided you use a proper stacking kit designed for your models. Ensure both appliances are stable and secure to prevent accidents or damage.
The Kenmore 70372 dryer offers various fabric settings, including cotton, delicates, permanent press, and air dry. Each setting is optimized for specific fabric types to ensure efficient and safe drying. Refer to the user manual for detailed instructions on each setting.
To replace the drum light, first unplug the dryer. Open the dryer door and locate the light cover. Remove the cover by unscrewing it, take out the old bulb, and replace it with a new one of the same type. Reattach the cover and plug the dryer back in.