Kenmore 40412 790.4041 Installation Instructions
![Kenmore 40412 790.4041 Oven manual cover](/images/HclyOFqGXdSQGoaUZJjGwKny/thumbs/thumb175x175.webp)
To calibrate the temperature, set the oven to bake mode. Press and hold the 'Bake' button for 6 seconds until '0' appears. Use the arrow keys to adjust the temperature up or down, then press 'Start' to confirm.
First, check if the oven is properly plugged in and the circuit breaker is not tripped. Ensure the controls are set correctly. If the issue persists, inspect the heating element for damage or consult a technician.
It's recommended to clean the oven door gasket every six months to maintain a proper seal. Use a damp cloth and mild detergent, and avoid using abrasive cleaners.
The clicking noise is normal and is usually caused by the relay switch cycling the heating elements on and off to maintain the set temperature. If the noise is excessive, consult a technician.
Yes, the self-cleaning feature can be used. Remove all racks and accessories, close the oven door, and select the self-cleaning option. Ensure proper ventilation in the area as the oven will heat to high temperatures.
Uneven baking may be caused by improper rack placement or an unlevel oven. Ensure racks are positioned correctly and the oven is level. Consider using a thermometer to check for consistent temperature distribution.
First, ensure the oven is turned off and cool. Remove the glass light cover by turning it counterclockwise. Replace the bulb with a new one of the same type, and reinstall the cover.
Remove the oven racks and soak them in warm, soapy water for 15-20 minutes. Use a non-abrasive scrubber to remove any residue, rinse, and dry thoroughly before placing them back in the oven.
Press the 'Delay Start' button, then use the arrow keys to set the desired start time. Select the cooking function and temperature, and press 'Start'. The oven will begin cooking at the specified time.
Inspect the door hinges and gasket for any obstructions or damage. Realign the door by gently pushing it to ensure it's seated correctly. If issues persist, a hinge replacement might be necessary.