iWantit IHFUSBN13 Instruction Manual
![iWantit IHFUSBN13 manual cover](/images/QQpCVLLomBhxCAYXCDBqsqzN/thumbs/thumb175x175.webp)
To connect your iWantit IHFUSBN13 Sound System to a Bluetooth device, ensure the sound system is in Bluetooth mode. Activate Bluetooth on your device and search for new devices. Select 'IHFUSBN13' from the list and pair.
Check if the volume is turned up on both the sound system and the connected device. Ensure all cables are securely connected and the correct input source is selected.
To reset the sound system, turn it off and unplug it from the power source. Wait for a few minutes, then plug it back in and turn it on while holding the reset button if available.
Use a soft, dry cloth to clean the exterior of the sound system. Avoid using chemicals or abrasive materials. Regularly check for dust buildup in vents and ports.
The iWantit IHFUSBN13 supports one active connection at a time. You can connect multiple devices via different methods (e.g., Bluetooth, AUX) but only one can be active at a time.
Ensure the power cable is securely connected and the outlet is working. Try using a different power outlet or cable if available. Check the fuse in the plug if applicable.
Adjust the sound settings on both the sound system and the playback device. Ensure the speakers are placed optimally in the room and that there are no obstructions.
Check the manufacturer's website for any firmware updates. Follow the instructions provided for downloading and installing updates if available.
Use the input button on the sound system or remote control to cycle through available input sources until you reach the desired one.
Store the sound system in a cool, dry place away from direct sunlight and moisture. Cover it to prevent dust accumulation if it will not be used for an extended period.